A losedLoop Theory of Motor Learning

The basic aspects must be executed properly in order to enable one to focus and direct attention to other concerns. As practice continues under proper conditions, certain changes will definitely take place. Learning is conducted through distinctive stages that start with cognitive concepts to automatic performance concepts. 1. Gliding through the ice, where this was the earliest form of ice skating. This was featured in the older types of skates that were made of bones. This allowed the skaters to glide or rather slide over the surface of the ice. The principle in gliding on the bone-made skates was possible due to the larger surface area in contact with the ice, along with the thin film of water between the skates and the ice surface. 2. Cutting into the ice, which is the modern adaptation of ice skates. These skates feature a metallic blade (mostly steel), which would then cut through the ice to a certain depth which therefore aided in motion in traversing through the ice. The sharp edges in the edge of the skates aides in moving through the ice due to the fact that the sharp edges provide low friction in moving through the ice. This method though adopted in modern ice skates, was developed between the thirteenth and fourteenth century by the Dutch. The birth of ice skating dates back to the BC era, three thousand years back. As mentioned earlier, the early forms of skates were made from bones, specifically animal bones dues to the rigidity in the structure. It was later that metal was used to replace animal bones. Animal bones along with leather were used to make skates that were known as ‘schenkel’ by the Dutch, who the early inventors or discoverers were of ice skating. Ice skating then gained major popularity in the United States of America, during the civil war era (Kleim et al. 2002).